Manufacturer of Seat Rails N SPORT

Manufacturer and wholesaler of seat rails for motor vehicles N SPORT​

Manufacturer and wholesaler of seat rails for motor vehicles N SPORT

N SPORT Seat rail Products

N SPORT SSD

Side Super Down

1position
DOWN 30〜60mm
recaro
bride
edrib
sparco
cobra
omp
racetech
NANIWAYA

Features

N SPORT SSD Side-mount Super-low-profile Seat Rail
Side-mount Super-low-profile seat rail

  • Designed for full bucket seats and other side-mount seats.
  • Height adjustments can be made with the side stays alone.
  • Designed for sports cars and other vehicles requiring a low seating position.
N SPORT SSD Side Super Down シートレール 特長
N SPORT SSD Side Super Down シートレール 特長
  • The seat is dropped between the sliders, bringing it to the lowest position physically possible.
  • As with other seat rails, only one hand is needed to slide the seat.
  • 4.5-mm side stays provide ample rigidity.
  • Distortion of sliders due to welding heat is eliminated, resulting in smoother sliding action.
The sliders and mounting frame are secured with rivets.
The side stays and seat belt buckle stay are jointly secured with rivets.

Detail

N SPORT SSD Side Super Down シートレール ディテール
N SPORT SSD Side Super Down シートレール ディテール
N SPORT SSD Side Super Down シートレール ディテール

Smooth sliding is assured.

Welding heat is the primary cause of slider hardening. The mounting frame and sliders of this model are secured with rivets to prevent thermal distortion of the metal sliders. Direct welding of sliders* is performed only as an auxiliary process to minimize the number of spot welds. For vehicles that require transfer of the original-equipment seat belt buckle to the seat rail, the seat belt buckle stay and side stay are fastened together. Smoother sliding action is achieved by the elimination of distortion due to welding heat.

* The structure of the SSD model requires that the console-side mounting frame be secured only by welding (without the use of rivets).

The seat drops down between the sliders, bringing it to the lowest position physically possible.

Because the seat is positioned between the left and right sliders, the seat can be lowered very close*1 to the vehicle floor for mounting. Despite its drop-in design, the innovative slide mechanism*2 allows the user to slide back and forth while holding the slide lever with one hand, as is common with most seat rails.

*1 Depending on the seat mounting position (bolt hole position).
*2 Raise the console-side lever by 90 degrees to release the seat into a free-sliding position. Raise the door-side slide lever to slide the seat to the desired position, then release this slide lever. Lock down the console-side lever.

4.5-mm thick side stays provide ample rigidity.

Due to the structure of Model SSD, the front and rear side stays are separate, but their thickness*1 is greater than that of the other side stays to ensure rigidity. The elongated bolt holes allow for the mounting of many different types of seats. This design also supports seats with high mounting positions*2 (bolt hole positions) such as the Recaro RS-G.

*1 Incorporates 4.5-mm thick members (3.2 mm for Model SSD-V, 3.4 mm for Model S1–S36).
*2 When the mounting position of the rear of the seat is high, only the bolt hole at the top of the side stay can be used.

シート取り付けボルト付属

Includes seat-mounting bolts.

All bolts required to mount the seat are included. Your current seat can be mounted only with these bolts.

サイドエアバッグキャンセラー付属

Includes side airbag canceller.

Regardless of whether standard or optional equipment is installed, side airbag cancellers are provided to prevent the triggering of warning lights in models equipped with side airbags.

N SPORT SSD Side Super Down シートレール ディテール

The 4.5-mm thick side stays provide ample rigidity.

Specification

  • Seat drop:
    30−60 mm
  • Installation method:
    Side mount
  • Height adjustments:
    Can be made only with side stays.
    Side stay adjustments: 16 mm/step
  • Mounted size:
    290 (±5) from front to rear of side stay × 380–395 mm left-to-right
  • Parts supplied:
    Seat-mounting bolts
    Seat belt buckle relocation parts*1
    Side airbag canceller*2

*1 Included with models requiring relocation of seat belt buckle.The contents of parts vary depending on the model.
*2 Supplied with models equipped with side airbags.

Conform

Compatible Auto Makers and Compatible Seats

RS-G series*1
TS-G series*1
SP-G series
SP-GT series
SP-A、
PRO RACER SP series
All models of full bucket seats*2031
042
067
REV series*4IMOLA2HTE-ONE*1*3
PROTOTIPO*1*3
ARS*1*3
All models of full bucket seats

*1 Only the bolt holes at the top of the side stays can be used at the rear of the seat.
*2 Not compatible with Zodia or Zeta3 Type XL models.
*3 Not compatible with seat widths exceeding 395 mm.
*4 Not compatible with Model REV2 made after 2016 (because the mounting width is 430 mm).
Accommodates seats with an installation width of 380 to 395 mm apart from those listed above

View of underside of the seat

“Seat mounting width” explained


We suggest measuring the width of the seat across its bottom as shown in the image. Measure from the surfaces that mount to the side stays.

If the front and rear of the seat vary in width, measure the seat at its widest point.