N SPORT Seat rail Products
N SPORT S36
Side 6×6 Position
Features
N SPORT S36 Side-mount 6 × 6-position Seat Rail
Side-mount seat rail with 36 (6 × 6) possible height combinations.
- Designed for full bucket seats and other side-mount seats.
- Height adjustments can be made with the side stays and with the six-step height adjustments at the front and rear of the seat, allowing for 36 possible height combinations.
- Ideal for vehicles with ample floor space that allows for a wide range of seat positions.
- A Super-low-profile model is available for vehicles requiring the lowest possible seating position.
- The general-purpose side stays accommodate many seat models.
- Distortion of sliders due to welding heat is eliminated, resulting in smoother sliding action. The sliders and mounting frame are secured with rivets. The sliders and seat belt buckle stay are secured with rivets.
Detail
Smooth sliding is assured.
Welding heat is the primary cause of slider hardening. The mounting frame and sliders of this model are secured with rivets to prevent thermal distortion of the metal sliders. Direct welding of sliders is performed only as an auxiliary process to minimize the number of spot welds. For vehicles that require transfer of the original-equipment seat belt buckle to the seat rail, the seat belt buckle stay is fixed with rivets. Smoother slide is achieved by the elimination of distortion due to welding heat.
Height adjustments on the side stays and the six-step height adjustment at the front and rear of the seat provide 36 possible height combinations.
In addition to the height adjustments on the side stays, the front and rear of the seat can be adjusted to six different height settings (2 × 3) through combinations of the two bolt holes provided at the front and rear of the frame fixed to the sliders and three bolt holes at the front and rear of the mounting frame.
Because the height adjustments are made with side bolts, no extra load is applied to the sliders even when the front and rear are set to different heights. The sliders and seat angle can be set to 36 (6 × 6) possible combinations without affecting the smoothness of the sliding action.
The general-purpose side stays accommodate many seat models.
The bolt holes used for mounting the seat itself are cut into elongated and diagonal shapes. In addition, the bolt holes for attaching to the sliders are elongated, which allows for mounting of many seat models. Moreover, in addition to offering fine adjustment of seat height and seat angle, this seat rail provides lateral seat adjustment to the left and right. It is also compatible with seats with a high bolt-hole mounting position,* such as the Recaro RS-G. In addition, weight-relief holes are provided for maximum weight reduction.
* For seats with higher mounting positions at the rear, only the bolt holes at the top of the side stays can be used.
Includes seat-mounting bolts.
All bolts required to mount the seat are included. Your current seat can be mounted only with these bolts.
Super-low-profile model
For vehicles requiring a low seating position, such as sports cars, we offer a Super-low-profile model that is a lower-profile version of the Standard model. As the driver’s hip point approaches the center of gravity of the vehicle, the driver experiences more accurate feedback from the car, such as vehicle handling and road conditions.
side airbag canceller.
Vehicles equipped with side airbags require a separate side airbag canceller to prevent warning lights from illuminating. There are 6 types, NPC001~006. Please check the matching list for the appropriate product.
Specification
- Seat drop:
10–30 mm for Standard model; 30–50 mm for Super-low-profile model - Installation method:
Side mount - Height adjustments:
On the side stays plus a six-step adjustment at the front and rear of the seat, allowing for 36 possible height combinations.
Slider adjustments: 18 mm/step
Mounting frame adjustments: 12 mm/step
Seat angle adjustment: -5° to 9° (14° range) - Mounted size:
290 (±5) from front to rear of side stay × 355–450 mm left to right
260 (±5) from front to rear of side stay × 355–450 mm left to right
233 (±5) from front to rear of side stay × 355–450 mm left to right - Parts supplied:
Seat-mounting bolts
Seat belt buckle relocation parts*
*Included with models requiring relocation of seat belt buckle.The contents of parts vary depending on the model.
Tips for mounting the seat to the side stays
Mount the seat to the side stays as orientated in the illustrations below. The installation width of the seat to be installed determines the orientation.
Adjustments required to center the seat relative to the steering wheel (adjusting the seat to the left or right) are performed by changing the orientation of the side stays as they mount to the seat rails.
Use spacers if the grommets of the belt holes interfere with the side stays, creating a gap between the seat body and the side stays.
(Adjust the number of spacers to fill the gap.)
Even if no interference occurs, a gap may be present depending on the width of the seat to be mounted. In that case, use spacers as well. (Use 30-mm bolts when using spacers; use 20-mm bolts when not using spacers.)
Note: Various spacers and bolts are included with the seat rail.
Conform
Compatible Auto Makers and Compatible Seats
 |  |  |  |  |  |
| RS-G series*1 TS-G series*1 SP-G series SP-GT series SP-GN series SP-A PRO RACER SP series | All models of full bucket seats*2 | 031 042 067 | REV series EVO series PRO2000 series CIRCUIT series S-LIGHT series ADV series*3 PRO ADV series QRT-V series*1 CORSA | IMOLA series SUZUKA EVOLUTION | HTE-ONE*1 PROTOTIPO*1 WRC*1 ARS*1 |
 |  | ||||
| RT1000 RT1000LB RT4009 RT9009 | All models of full bucket seats |
*1 Only the bolt holes at the top of the side stays can be used at the rear of the seat.
*2 Not compatible with Zodia model.
*3 Not compatible with ADV XT model.
Accommodates seats with an installation width of 355 to 450 mm apart from those listed above.
“Seat mounting width” explained
We suggest measuring the width of the seat across its bottom as shown in the image. Measure from the surfaces that mount to the side stays.
If the front and rear of the seat vary in width, measure the seat at its widest point.
