N SPORT Seat rail Products
Gaming / Display
Seat Stand
Features
N SPORT Gaming Seat/Display Stand with Casters
- Six height settings at both the front and rear of the seat allow for 36 possible height combinations.
- Equipped with smooth, floor-friendly casters.
- Accommodates full-bucket seats and original-equipment seats.
Recaro, Bride, Sparco and other seats can now be used outside of the vehicle.
This seat stand can be used to display Recaro, Bride, Sparco and other seats in a shop or in the home. The front casters are provided with a stopper.
Accommodates full-bucket seats and original-equipment seats.
This product can be used with full-bucket seats and other seats that are mounted from the side in combination with a general-purpose side stay.*1 The use of our Original-Equipment Seat Conversion Adapter*2 makes it possible to attach an original-equipment seat removed from a vehicle.
*1 Sold separately（Click here for details）
*2 Sold separately（Click here for details）
Installed on an original-equipment seat
Installed on a reclining seat
Installed on a bucket seat
Detail
Six-step height adjustment located at both the front and rear of the seat for a total of 36 possible height combinations.
The combination of two bolt holes on the front and back of the upper frame and three on the front and back of the lower frame, the height can be adjusted to 6 (2 × 3) types for each front and rear. Since the height is adjusted with the bolts on the side, no extra load is applied even at different heights in the front and rear, and it can be set with 36 (6 × 6) different heights and seat angles.
Includes seat-mounting bolts.
All bolts required to mount the seat are included. Your current seat can be mounted only with these bolts.
Seat height and seat angle adjustment bolts
Conversion Adapter
Specification
- Black
- Height adjustments:
6-step adjustment at front and rear of the seat for 36 possible height combinations
upper frame adjustments: 18 mm/step
lower frame adjustments: 12 mm/step
Seat angle adjustment: -5° to 9° (14° range) - Mounted size:
260 mm front to rear × 405 mm left to right / 6-mm-dia. bolt × 4 pcs
297 mm front to rear × 405 mm left to right / 8-mm-dia. bolt × 4 pcs - Dimensions:
W 455 × D 510 × H 165 to 204 mm - Kit contents:
Stand unit × 1
(Includes seat height and seat angle adjustment bolts.)
M6 × 20-mm cap bolt × 4 pcs
M8 × 20-mm cap bolt × 4 pcs
M6 flat washer × 4 pcs
M8 flat washer × 4 pcs
Conform
Compatible Auto Makers and Compatible Seats
 |  |  |  |  |  |
| SR series L series LX-F（LX Successor model） ERGOMED series Old model ORTHOPAD series Current ORTHOPAD series SP-X Sportster series Cross Sportster series*1*4 SPORT series STYLE series TREND series CT C-Classic | EUROSTER series*2 STREAMS series*2 DIGO series*2 ZAOU series*2 ERGOSTER series*2 GIAS series STRADIA series CUGA series*3 VORGA series*3 | 032*2 054*2 110*2 132*2 023 033 | SPX*2 EXPEDITION*2 SKY*2 R700*2 R600*2 R505*2 R333*2 R100*2 F550*2 F500*2 F300*2 F200*2 F104*2 SPEED*2 SPRINT*2 TORINO*2 MILANO*2 MONZA*2 | CLASSIC*2 CUB*2 CLUBMAN*2 CLUB SPORT*2 CLASSIC RS*2 CLASSIC RSR*2 CLASSIC GT*2 ROADSTAR SR*2 | LANCER Evolution 1-4 (LS、SR3) 5～6(SPORT-J) 7-9(Dedicated seat/SP-JS Special pitch)*1 Civic Type-R EK9(SR3) EP3(SPORT-J) Integra type-R DC2(SR3) DC5(SR4) |
*1 Spacer kit required (Click here for details).
*2 Conversion adapter required (Click here for details).
*3 Not available for model HL.
*4 Spacer set is not required when reinforce bracket is not installed.
For other seat models, we recommend confirming the mounted size before purchase.
