N SPORT Seat rail Products
N SPORT S1
Side 1 Position
N SPORT S1 Side-mount Single-position Seat Rail
Side-mount seat rail
- Designed for full bucket seats and other side-mount seats.
- Height adjustments can be made with the side stays alone.
- Ideal for vehicles in which the position of the original-equipment seat can be raised easily, such as those with a low seating position or thin seat surface.
- A Super-low-profile model is available for vehicles requiring the lowest possible seating position.
- The general-purpose side stays accommodate many seat models.
- Distortion of sliders due to welding heat is eliminated, resulting in smoother sliding action. The sliders and mounting frame are secured with rivets. The sliders and seat belt buckle stay are secured with rivets.
Smooth sliding is assured.
Welding heat is the primary cause of slider hardening. The mounting frame and sliders of this model are secured with rivets to prevent thermal distortion of the metal sliders. Direct welding of sliders is performed only as an auxiliary process to minimize the number of spot welds. For vehicles that require transfer of the original-equipment seat belt buckle to the seat rail, the seat belt buckle stay is fixed with rivets. Smoother slide is achieved by the elimination of distortion due to welding heat.
The general-purpose side stays accommodate many seat models.
Includes seat-mounting bolts.
All bolts required to mount the seat are included. Your current seat can be mounted only with these bolts.
Includes side airbag canceller.
Regardless of whether standard or optional equipment is installed, side airbag cancellers are provided to prevent the triggering of warning lights in models equipped with side airbags.
- Seat drop:
10–30 mm for Standard model; 30–50 mm for Super-low-profile model
- Installation method:
- Height adjustments:
Can be made only with side stays.
Side stay adjustments: 12 mm/step
- Mounted size:
290 (±5) from front to rear of side stay × 355–450 mm left to right
260 (±5) from front to rear of side stay × 355–450 mm left to right
233 (±5) from front to rear of side stay × 355–450 mm left to right
- Parts supplied:
Seat belt anchor bolts*1
Side airbag canceller*2
*1 Supplied with models requiring relocation of the seat belt buckle.
*2 Supplied with models equipped with side airbags.
Tips for mounting the seat to the side stays
Mount the seat to the side stays as orientated in the illustrations below. The installation width of the seat to be installed determines the orientation.
Adjustments required to center the seat relative to the steering wheel (adjusting the seat to the left or right) are performed by changing the orientation of the side stays as they mount to the seat rails.
Use spacers if the grommets of the belt holes interfere with the side stays, creating a gap between the seat body and the side stays.
(Adjust the number of spacers to fill the gap.)
Even if no interference occurs, a gap may be present depending on the width of the seat to be mounted. In that case, use spacers as well. (Use 30-mm bolts when using spacers; use 20-mm bolts when not using spacers.)
Note: Various spacers and bolts are included with the seat rail.
Compatible Auto Makers and Compatible Seats
PRO RACER SP series
|All models of full bucket seats*2||031|
PRO ADV series
|All models of full bucket seats|
*1 Only the bolt holes at the top of the side stays can be used at the rear of the seat.
*2 Not compatible with Zodia model.
*3 Not compatible with ADV XT model.
Accommodates seats with an installation width of 355 to 450 mm apart from those listed above.
“Seat mounting width” explained
We suggest measuring the width of the seat across its bottom as shown in the image. Measure from the surfaces that mount to the side stays.
If the front and rear of the seat vary in width, measure the seat at its widest point.