N SPORT Seat rail Products
Gaming / Display
- Six height settings at both the front and rear of the seat allow for 36 possible height combinations.
- Accommodates full-bucket seats and original-equipment seats.
Recaro, Bride, Sparco and other vehicle seats can now be used outside of the vehicle.
This seat stand can be used to display Recaro, Bride, Sparco and other seats in a shop or in the home.
The rubber set on the bottom alleviates slippage and scratches (on the floor) to some extent.
But if you’re worried about floor damage, lay a mattress or
It is recommended to have casters.
Accommodates full-bucket seats and original-equipment seats.
This product can be used with full-bucket seats and other seats that are mounted from the side in combination with a general-purpose side stay.*1 The use of our Original-Equipment Seat Conversion Adapter*2 makes it possible to attach an original-equipment seat removed from a vehicle.
Installed on a reclining seat
Installed on a bucket seat
Six-step height adjustment located at both the front and rear of the seat for a total of 36 possible height combinations.
The combination of two bolt holes on the front and back of the upper frame and three on the front and back of the lower frame, the height can be adjusted to 6 (2 × 3) types for each front and rear. Since the height is adjusted with the bolts on the side, no extra load is applied even at different heights in the front and rear, and it can be set with 36 (6 × 6) different heights and seat angles.
Includes seat-mounting bolts.
Seat height and seat angle adjustment bolts
6-step adjustment at front and rear of the seat for 36 possible height combinations
upper frame adjustments: 18 mm/step
lower frame adjustments: 12 mm/step
Seat angle adjustment: -5° to 9° (14° range)
260 mm front to rear × 405 mm left to right / 6-mm-dia. bolt × 4 pcs
295 mm front to rear × 405 mm left to right / 8-mm-dia. bolt × 4 pcs
W 455 × D 510 × H 96 to 135 mm
Stand unit × 1
(Includes seat height and seat angle adjustment bolts.)
M6 × 20-mm cap bolt × 4 pcs
M8 × 20-mm cap bolt × 4 pcs
M6 flat washer × 4 pcs
M8 flat washer × 4 pcs
Compatible Auto Makers and Compatible Seats
LX-F（LX Successor model）
Old model ORTHOPAD series
Current ORTHOPAD series
Cross Sportster series*1*4
7-9(Dedicated seat/SP-JS Special pitch)*1